No. 1003 is a gas-fired, 500ºF (~260ºC) walk-in oven from Grieve, currently used for drying molded fiber parts at the customer’s facility. Workspace dimensions in this oven measure 48” W x 48” D x 72” H. 800,000 BTU/HR are installed in a modulating natural gas burner to heat the oven chamber, while a 4200 CFM, 3-HP recirculating blower provides vertical upward airflow from a duct beneath the loading truck to the workload.
This Grieve walk-in oven features 4” thick insulated walls, aluminized steel exterior, Type 304, 2B finish stainless steel interior with continuously welded seams and insulated floor with integral truck wheel guide tracks.
No. 1003 has all safety equipment onboard to process flammable solvents, as required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment, including a 975 CFM powered forced exhauster and purge timer.
Additionally, controls on this Grieve walk-in oven include a digital programming temperature controller, digital shut down timer with audible alarm, fused disconnect switch and 8-point internal thermocouple jack panel wired to the jack panel on the face of the control panel.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road, Round Lake
Illinois 60073-2835 USA
Phone: (847) 546-8225
Fax: (847) 546-9210
Attention: Frank Calabrese
Agency contact: Tim Daro
Phone: (847) 934-4500